Ask AI: roblox studio turbo rx7 fc drift tune A chassis

To drift tune your Mazda FD RX-7 in Roblox Studio, you will need to adjust certain settings to optimize your car for drifting. Here's a simple guide to help you get started. However, remember that these numbers may vary between different games on Roblox, so you may need to adjust them accordingly. 1. **Spring Constant:** Shifting this setting to a lower number would generally make the car easier for drifting. You can start at around the 25000-35000 range. 2. **Damper Constant:** This setting controls the suspension's resistance to its spring motion. For drifting, a slightly lower setting may be better. Start somewhere in the 1500-2500 range. 3. **Front Tire Grip:** You want this to be slightly less than the rear tire grip because you need the car to slide. Set it to around 0.28 - 0.32. 4. **Rear Tire Grip:** This can be set to around 0.30 - 0.35. 5. **Steer Speed:** A higher steering speed helps in drifting. Something around 4 could work well. 6. **Max Steer Angle:** This controls the car's maximum steering capability. For drifting, a higher number is preferable. You can start experimenting at about 45 - 60 degrees, then increase or lower as you see fit. 7. **Torque:** This is related to the engine power output. Setting it higher makes drifting easier due to increased power. Try 250-350 torque as a start. 8. **Brake Power:** A high value can help in performing drift turns. Try setting it around 7500-8500 to start with. These are just suggestions and can greatly vary depending on the physics of the game you're playing. Apart from these configurations, getting good at drifting in Roblox Studio also requires a lot of practice. It might take you a while to get these settings dialed in just right for your driving style, but keep at it! Fine-tuning your car and practicing your driving will help you become a great drifter. Happy gaming!