Ask AI: Give me an RX7 drift tune in Midnight Racing Tokyo (ROBLOX)

To create a drift tune for an RX7 in Midnight Racing Tokyo (ROBLOX), follow these steps: 1. Start the game and enter the tuning menu. 2. Select the Mazda RX7 as your car. 3. Adjust the following settings: Engine & Performance: - Turbo: Set to maximum available Suspension: - Spring stiffness (Front): Set around 25-30% - Spring stiffness (Rear): Set around 25-30% - Damper stiffness (Front): Set around 50% - Damper stiffness (Rear): Set around 50% - Anti-roll bar stiffness (Front): Set around 20% - Anti-roll bar stiffness (Rear): Set around 20% - Ride height (Front): Lower to the lowest possible setting - Ride height (Rear): Lower to the lowest possible setting Alignment: - Camber (Front): Set to around -7-8 degrees - Camber (Rear): Set to around -2-3 degrees - Toe (Front): Set to around 1-2 degrees out - Toe (Rear): Set to around 0-1 degrees in - Caster (Front): Set to the highest possible setting Drivetrain: - Transmission: Manual transmission recommended for better control - Differential settings: Adjust to taste - Acceleration: Set to around 60-70% - Deceleration: Set to around 30-40% Brakes: - Brake balance: May vary depending on playstyle - Front brakes: Set around 60% - Rear brakes: Set around 40% Tires: - Tire choices can be made as per personal preference - Tire pressures (Front): Set to around 20-25 PSI - Tire pressures (Rear): Set to around 25-30 PSI In addition to these settings, you can also adjust your driving preferences, such as steering angle and sensitivity, to your liking. Remember that tuning is a personal preference and it may take some time to find the perfect settings for you. Experiment with different options and practice drifting to improve your skills!